ZIPLINEGEAR

What is included in a zip line kit?

While kit contents can vary, a basic zip line kit generally includes the main cable, a trolley, and hardware for attachment to anchors. Other components like cable slings, turnbuckles, cable clamps, thimbles, stop blocks, and tensioning tools may also be included depending on the specific kit. Accessories such as handlebars, seats, harnesses, and braking systems like spring brakes or bungee brakes are often available separately or included in more comprehensive kits.

Are zip line kits safe?

Using a zip line is never risk-free, but zip lining can be made safer when installed and used correctly according to all instructions. It is crucial to read and understand all installation and safety guidelines, ensure proper oversight, supervision, and maintain / inspect all equipment before each use. Never ride a zip line without first testing it.

How easy is it to install a zip line kit?

While we don’t consider installing a zip line an “easy” endeavor, we’ve done our best to make each step as clear as possible in our ZipLineGear Handbook. We’re also available to offer suggestions or discuss the specifics of your installation over the phone, five days a week. Installing a zip line kit requires careful site selection and adherence to detailed cable installation procedures. The process involves determining accessible launch and dismount locations, clearing the area of obstructions, and properly securing anchors to suitable trees or posts. Cable tensioning is a critical step, and

What is the weight limit for a zip line kit?

The weight limit depends on the specifics of your setup, but a good rule of thumb is that you should never place more than 350 pounds on the zip line. A weight test equal to the weight of the heaviest anticipated participant, up to 350 lbs, must be performed before use. Pay close attention to the weight limit for each specific kit listed on our website.

What length of zip line kit should I choose?

The appropriate length of your zip line kit depends on the distance between your chosen anchor points and the topography of your site. The ZipLineGear handbook includes a worksheet to help determine the necessary length, considering factors like distance between anchors, desired slope, and calculated sag. Landscape with a natural slope of 3% to 6% is recommended. If you have flat ground, the longer the zip line length you choose, the higher you need to start to account for slope.

Can zip line kits be installed on trees?

Yes, zip line kits can be installed on trees, provided the trees are appropriate anchors. Tree trunks must have a minimum diameter of 12 inches at the attachment point and should not have rot, disease, structural cracks, excessive lean, or exposed roots. Attachment should only be to the central trunk, not limbs or branches. Using tree saver blocks are recommended to protect the tree.

Can zip line kits be installed on posts?

Yes, zip line kits can be installed on posts. Wood posts used as anchors must have a minimum diameter of 12 inches. Posts must be sunk at least 4 feet into the ground, or 10% of the post length plus 2 feet (whichever is greater), and secured with 6 inches of concrete around the base. Guy cables and ground anchors may be required for additional support. Eyebolts can be used for attaching the cable to wood or metal poles, ensuring the eyebolt has a proper strength rating and is long enough to protrude through the post with a washer and nut.

Do zip line kits come with safety harnesses?

Safety harnesses are included in the Boomerang, Rogue, Brakehawk, or Sleadd 250LX kits. If you’re interested in a different kit, a harness, lanyard and carabiner can always be included as an add on. We have harness options available for both kids and adults .